- You are here:
- Full Key
- Grass-like plants
- True grasses
- Polypogon viridis
Polypogon viridis — beardless rabbit's-foot grass
Copyright: various copyright holders. To reuse an image, please click it to see who you will need to contact.
Facts
Beardless rabbit's-foot grass, native to a large region from southern Europe and North Africa to much of Asia, is an occasional visitor to New England, at least sometimes by way of ships' ballast. It has been collected only in Connecticut, in ditches and riparian areas.
Habitat
Anthropogenic (man-made or disturbed habitats)
New England distribution
Adapted from BONAP data
Native: indigenous.
Non-native: introduced (intentionally or unintentionally); has become naturalized.
County documented: documented to exist in the county by evidence (herbarium specimen, photograph). Also covers those considered historical (not seen in 20 years).
State documented: documented to exist in the state, but not documented to a county within the state. Also covers those considered historical (not seen in 20 years).
Note: when native and non-native populations both exist in a county, only native status is shown on the map.
Found this plant? Take a photo and post a sighting.
Characteristics
- Habitat
- terrestrial
- New England state
- Connecticut
- Leaf blade width
- 1–6 mm
- Inflorescence branches
-
- the flowers are attached to branches rather than to the main axis of the inflorescence
- there are no branch points between the base of the inflorescence axis and the flowers, or they are not obvious
- Spikelet length
- 1.5–2.5 mm
- Glume relative length
- one or both glumes are as long or longer than all of the florets
- Awn on glume
- the glume has no awn
- One or more florets
- there is one floret per spikelet
- Lemma awn length
- 0 mm
- Leaf sheath hair type
- there are no hairs on the surface of the leaf sheath
- Leaf ligule length
- 2–5 mm
- Anther length
- 0.3–0.5 mm
-
Flowers
- Anther length
- 0.3–0.5 mm
- Anther number
- 3
- Awn on glume
- the glume has no awn
- Bristles below spikelets
- no
- Floret lower bract texture
- the lemma is thin and flexible
- Floret number
- 1
- Floret types within spikelet
- all the florets within a spikelet are similar
- Glume awn length
- 0 mm
- Glume keel
- the glume keels are rough or hairy
- Glume relative length
- one or both glumes are as long or longer than all of the florets
- Glume shape
- the glume is V-shaped in cross-section
- Glume veins
- 1
- Glumes per spikelet
- 2
- Inflorescence arrangement
- the spikelets are uniform
- Inflorescence axis orientation
-
- the inflorescence axis is arched or curved outward
- the inflorescence axis is straight
- Inflorescence branches
-
- the flowers are attached to branches rather than to the main axis of the inflorescence
- there are no branch points between the base of the inflorescence axis and the flowers, or they are not obvious
- Inflorescence crowding
- the panicle is somewhat to very congested (crowded), and the branches may not be clearly seen without close inspection
- Inflorescence length
- 20–150 mm
- Inflorescence length to width ratio
- 3.8–4
- Inflorescence type (general)
- the spikelets are borne on stalks or on branches
- Inflorescence type (specific)
- the inflorescence is branched, and the branches do NOT both grow from the same side of the plant AND look like spikes
- Inflorescence width
- 5–40 mm
- Inforescence position
- the spikelets are mainly carried at the end of the stem
- Lemma awn base
- NA
- Lemma awn coiled
- NA
- Lemma awn length
- 0 mm
- Lemma awn number
- the lemma has no awn
- Lemma awn orientation
- NA
- Lemma base hair length
- 0 mm
- Lemma base hairs
- the lemma is hairless or feels just a tiny bit rough at the base
- Lemma cross-section
- the lemma is flat or rounded if you cut across the midpoint
- Lemma hairs
- the lemma is hairless between the veins
- Lemma keel hairs
- NA
- Lemma surface
- the surface of the lemma is relatively smooth (not counting any longitudinal veins or hairs)
- Lemma tip
-
- the lemma tip has a ragged edge
- the lemma tip is split into two or more points
- Lemma tip shape
- the lemma tip is rounded off or truncate (ends abruptly in a more or less straight line as though cut off); it may or may not also have an awn or teeth at the tip
- Lemma vein number
- 5
- Lower glume length
- 1.5–2 mm
- Lower glume relative length
- the lower glume is nearly as long, or as long as, the upper glume
- One or more florets
- there is one floret per spikelet
- Palea relative length
- palea is one half to fully as long as lemma
- Reproductive system
- all the flowers on the plant have both carpels and stamens (synoecious)
- Spikelet axis tip
- there is no extension of the spikelet axis beyond the tip of the spikelet
- Spikelet disintegration
- the spikelet breaks off below the glumes
- Spikelet length
- 1.5–2.5 mm
- Spikelet number per node
- Up to 0
- Spikelet pedicel
- the spikelets have pedicels
- Spikelet pedicel length
- 0.2–0.5 mm
- Spikelet position
- the spikelets emerge from both the upper and lower halves of the inflorescence branches
- Spikelet shape
- the spikelets are elliptic (widest in the middle, tapering to the ends) in profile
- Spikelets spiny
- the spikelets do not appear spiny
- Tip of glume
- the tip of the glume is not divided (though it may have an awn on it)
- Upper glume length
- 1.5–2 mm
- Upper glume relative length
- the upper glume is more than one half as long as the lowest lemma
- Upper glume shape
- the upper glume is widest at or below the middle
-
Growth form
- Horizontal rooting stem
-
- no
- yes
- Lifespan
- the plant lives more than two years
- Rhizomes
- no
- Roots
- there are only slender roots on the plant
-
Leaves
- Basal leaves
- the plant has large or prominent tufts of leaves at the base of the flowering stem
- Leaf auricles
- the leaves do not have auricles
- Leaf basal lobe hairy
- NA
- Leaf blade cross-section
- the leaf blade is more or less flat in cross-section, or slightly folded or rolled inwards
- Leaf blade length
- 2–13 cm
- Leaf blade texture
- the leaf blade is rough and sandpapery
- Leaf blade width
- 1–6 mm
- Leaf ligule length
- 2–5 mm
- Leaf ligule type
- the leaf ligule is in the form of a membrane
- Leaf margin glands
- there are no glands along the edges of the leaf blade
- Leaf sheath closed around stem
- the margins of the leaf sheath are overlapping and not fused together except in the basal half (or less)
- Leaf sheath color and persistence
- the leaf sheathes are off-white to light-brown and mostly persist in older leaves
- Leaf sheath hair type
- there are no hairs on the surface of the leaf sheath
-
Place
- Habitat
- terrestrial
- New England state
- Connecticut
- Specific habitat
- man-made or disturbed habitats
-
Stem, shoot, branch
- Plant height
- 10–90 cm
- Roots at lower stem nodes
- yes
- Stem orientation
-
- the stems are upright
- the stems trail at the base, but turn upwards at the tips
- Stem spacing
- the stems grow close together in compact clusters or tufts
Wetland status
Usually occurs in wetlands, but occasionally in non-wetlands. (Wetland indicator code: FACW)
In New England
Distribution
- Connecticut
- present
- Maine
- absent
- Massachusetts
- absent
- New Hampshire
- absent
- Rhode Island
- absent
- Vermont
- absent
Conservation status
None
From Flora Novae Angliae dichotomous key
2. Polypogon viridis (Gouan) Breistr. E
beardless rabbit’s-foot grass. Agrostis semiverticillata (Forsk.) C. Christens.; A. verticillata Vill.; A. viridis Gouan; Polypogon semiverticillatus (Forsk.) Hyl. • CT. Ballast dumps, ditches, riparian areas.
Native to North America?
No
Sometimes confused with
- Polypogon monspeliensis:
- glumes tipped by an awn 4–10 mm long, lemmas tipped by an awn mostly 0.5–1 mm long, and ligules 2.5–16 mm long (vs. P. viridis, with glumes unawned, lemmas unawned, and ligules up to 5 mm long).
Synonyms
- Agrostis semiverticillata (Forsk.) C. Christens.
- Agrostis verticillata Vill.
- Agrostis viridis Gouan
- Polypogon semiverticillatus (Forsk.) Hyl.