- You are here:
- Simple Key
- Grass-like plants
- True grasses
- Spartina pectinata
Spartina pectinata — prairie cordgrass
Copyright: various copyright holders. To reuse an image, please click it to see who you will need to contact.
Facts
Prairie cordgrass grows on river and lake shores and freshwater marshes, as well as the upper edges of salt marshes. It is one of the tallest grasses in North America, and an important species of tallgrass prairies in the Midwest, growing mainly in wet depressions. The Omaha and Ponca peoples used prairie cordgrass as thatching to support the earthen coverings of lodges.
Habitat
Anthropogenic (man-made or disturbed habitats), brackish or salt marshes and flats, fresh tidal marshes or flats, marshes, meadows and fields, shores of rivers or lakes, wetland margins (edges of wetlands)
New England distribution
Adapted from BONAP data
Native: indigenous.
Non-native: introduced (intentionally or unintentionally); has become naturalized.
County documented: documented to exist in the county by evidence (herbarium specimen, photograph). Also covers those considered historical (not seen in 20 years).
State documented: documented to exist in the state, but not documented to a county within the state. Also covers those considered historical (not seen in 20 years).
Note: when native and non-native populations both exist in a county, only native status is shown on the map.
Found this plant? Take a photo and post a sighting.
Characteristics
- Habitat
-
- aquatic
- terrestrial
- wetlands
- New England state
-
- Connecticut
- Maine
- Massachusetts
- New Hampshire
- Rhode Island
- Vermont
- Leaf blade width
- 5–15 mm
- Inflorescence branches
- the flowers are attached to branches rather than to the main axis of the inflorescence
- Spikelet length
- 10–25 mm
- Glume relative length
- one or both glumes are as long or longer than all of the florets
- Awn on glume
- the glume has an awn
- One or more florets
- there is one floret per spikelet
- Lemma awn length
- 0 mm
- Leaf ligule length
- 1–3 mm
- Anther length
- 4–6 mm
-
Flowers
- Anther length
- 4–6 mm
- Anther number
- 3
- Awn on glume
- the glume has an awn
- Bristles below spikelets
- no
- Floret lower bract texture
- the lemma is thin and flexible
- Floret number
- 1
- Floret types within spikelet
- all the florets within a spikelet are similar
- Glume awn length
- 3–8 mm
- Glume keel
- the glume keels are rough or hairy
- Glume relative length
- one or both glumes are as long or longer than all of the florets
- Glume shape
- the glume is V-shaped in cross-section
- Glume veins
-
- 1
- 3
- Glumes per spikelet
- 2
- Inflorescence arrangement
- the spikelets are uniform
- Inflorescence axis hairs
-
- the inflorescence axis is rough and feels like sand-paper
- the inflorescence axis is smooth and has no hairs
- Inflorescence axis orientation
- the inflorescence axis is straight
- Inflorescence branch length
- 1.5–15 cm
- Inflorescence branch roughness
- the inflorescence branches are somewhat to very rough
- Inflorescence branches
- the flowers are attached to branches rather than to the main axis of the inflorescence
- Inflorescence branches coming off the lowest stem node
- 1
- Inflorescence crowding
- the panicle is somewhat to very spread out, with clearly-evident branches
- Inflorescence length
- 100–500 mm
- Inflorescence type (general)
- the spikelets are borne on stalks or on branches
- Inflorescence type (specific)
- the inflorescence is branched and the branches all grow from the same side of the plant and look like spikes
- Inforescence position
- the spikelets are mainly carried at the end of the stem
- Lemma awn base
- NA
- Lemma awn coiled
- NA
- Lemma awn length
- 0 mm
- Lemma awn number
- the lemma has no awn
- Lemma awn orientation
- NA
- Lemma base hair length
- 0 mm
- Lemma base hairs
- the lemma is hairless or feels just a tiny bit rough at the base
- Lemma cross-section
- the lemma is V-shaped if you cut across the midpoint
- Lemma hairs
- the lemma is hairless between the veins
- Lemma keel hairs
- the keel of the lemma is rough, or has fine hairs
- Lemma marginal vein hairs
- the marginal vein of the lemma is hairless
- Lemma surface
- the surface of the lemma is relatively smooth (not counting any longitudinal veins or hairs)
- Lemma tip
- the lemma tip is split into two or more points
- Lemma vein number
-
- 1
- 3
- Lower glume length
- 5–10 mm
- Lower glume relative length
- the lower glume is one third to three quarters as long as the upper glume
- One or more florets
- there is one floret per spikelet
- Palea length
- 8–9 mm
- Palea relative length
- palea is longer than lemma
- Reproductive system
- all the flowers on the plant have both carpels and stamens (synoecious)
- Spikelet axis length
- 0 mm
- Spikelet axis tip
- there is no extension of the spikelet axis beyond the tip of the spikelet
- Spikelet disintegration
- the spikelet breaks off below the glumes
- Spikelet length
- 10–25 mm
- Spikelet number per node
- 0
- Spikelet pedicel
- the spikelets do not have pedicels
- Spikelet pedicel length
- 0 mm
- Spikelet position
- the spikelets emerge from both the upper and lower halves of the inflorescence branches
- Spikelets per panicle branch
- 10–80
- Spikelets spiny
- the spikelets do not appear spiny
- Tip of glume
- the tip of the glume is not divided (though it may have an awn on it)
- Upper glume length
- 7–17 mm
- Upper glume relative length
- the upper glume is more than one half as long as the lowest lemma
- Upper glume shape
- the upper glume is widest at or below the middle
-
Growth form
- Horizontal rooting stem
- no
- Lifespan
- the plant lives more than two years
- Rhizomes
- yes
- Roots
- the plant has rhizomes (horizontal underground stem with roots growing from it)
-
Leaves
- Basal leaves
- the plant has few or no leaves coming from the base of the flowering stem
- Leaf auricles
- the leaves do not have auricles
- Leaf basal lobe hairy
- NA
- Leaf blade cross-section
- the leaf blade is more or less flat in cross-section, or slightly folded or rolled inwards
- Leaf blade hairs
- the leaf blade is hairless, but it may have tiny prickles that give it a sand-papery feel
- Leaf blade length
- 20–96 cm
- Leaf blade texture
- the leaf blade is rough and sandpapery
- Leaf blade width
- 5–15 mm
- Leaf ligule length
- 1–3 mm
- Leaf ligule type
- the leaf ligule is in the form of a membrane with fine hairs
- Leaf margin glands
- there are no glands along the edges of the leaf blade
- Leaf sheath closed around stem
- the margins of the leaf sheath are overlapping and not fused together except in the basal half (or less)
- Leaf sheath hairs
- there are no hairs on the surface of the leaf sheath
-
Place
- Habitat
-
- aquatic
- terrestrial
- wetlands
- New England state
-
- Connecticut
- Maine
- Massachusetts
- New Hampshire
- Rhode Island
- Vermont
- Specific habitat
-
- brackish or salt marshes and flats
- edges of wetlands
- fresh tidal marshes or flats
- man-made or disturbed habitats
- marshes
- meadows or fields
- shores of rivers or lakes
-
Stem, shoot, branch
- Hairs at nodes
- the stem nodes are hairless or they have very sparse hairs
- Plant height
- 100–250 cm
- Stem hairs
- the stem is nearly to completely hairless
- Stem orientation
- the stems are upright
- Stem spacing
- the stems grow close together in compact clusters or tufts
- Stem thickness at base
- 2.5–11 mm
Wetland status
Usually occurs in wetlands, but occasionally in non-wetlands. (Wetland indicator code: FACW)
In New England
Distribution
- Connecticut
- present
- Maine
- present
- Massachusetts
- present
- New Hampshire
- present
- Rhode Island
- present
- Vermont
- present
Conservation status
Exact status definitions can vary from state to state. For details, please check with your state.
- Maine
- unranked (S-rank: SNR)
- Massachusetts
- widespread (S-rank: S5)
From Flora Novae Angliae dichotomous key
4. Spartina pectinata Link N
prairie cordgrass. Spartina pectinata (Ait.) Muhl. var. suttiei (Farw.) Fern. • CT, MA, ME, NH, RI, VT. River and lake shores, roadsides, fresh water marshes, upper edge of saline and brackish marshes, low areas in fields.
3×4. Spartina patens × Spartina pectinata → Spartina ×caespitosa A.A. Eat. is a rare hybrid that grows in disturbed saline and brackish marshes. It is highly variable due to its polyphyletic origin. It usually demonstrates the few and short panicle branches, short ligules, and involute leaf blades of S. patens; however, the rhizomes (when present) are usually purple-brown and have closely imbricate scales and the spikelets are 10–17 mm long (vs. white rhizomes with non-imbricate scales and spikeletes 7–12 mm in S. patens). This nothospecies often has a cespitose habit, unlike any other Spartina in New England. It is known from CT, MA, ME, NH, RI.
Native to North America?
Yes
Sometimes confused with
- Spartina alterniflora:
- leaves smooth or slightly scabrous along apical margins and rhizome white when fresh (vs. S. pectinata, with leaves prominently scabrous and rhizome light brown to purple-brown when fresh).
- Spartina cynosuroides:
- upper glumes unawned or with awns up to 2 mm long, the lateral veins usually hispid, and lower glume 1/2 to 2/3 as long as adjacent lemma (vs. S. pectinate, with upper glumes with awns 3–8 mm long, the lateral veins usually glabrous, and lower glume 3/4 to fully as long as adjacent lemma).
Synonyms
- Spartina pectinata var. suttiei (Farw.) Fern.