- You are here:
- Dichotomous Key
- Asteraceae
- Asteraceae Group 4
- Solidago
- Solidago sempervirens
Solidago sempervirens — seaside goldenrod
Copyright: various copyright holders. To reuse an image, please click it to see who you will need to contact.
Facts
The waxy, fleshy leaves of seaside goldenrod are distinctive. They help the plant retain water and are an adaptation to the drying effects of salt spray.
Habitat
Coastal beaches (sea beaches), dunes, marshes
New England distribution
Adapted from BONAP data
Native: indigenous.
Non-native: introduced (intentionally or unintentionally); has become naturalized.
County documented: documented to exist in the county by evidence (herbarium specimen, photograph). Also covers those considered historical (not seen in 20 years).
State documented: documented to exist in the state, but not documented to a county within the state. Also covers those considered historical (not seen in 20 years).
Note: when native and non-native populations both exist in a county, only native status is shown on the map.
Found this plant? Take a photo and post a sighting.
Characteristics
- Habitat
- wetlands
- New England state
-
- Connecticut
- Maine
- Massachusetts
- New Hampshire
- Rhode Island
- Leaf type
- leaves are simple (i.e., lobed or unlobed but not separated into leaflets)
- Leaf arrangement
- alternate: there is one leaf per node along the stem
- Leaf blade edges
- the edge of the leaf blade has no teeth or lobes
- Flower type in flower heads
- the flower head has tubular disk flowers in the center and ray flowers, these often strap-shaped, around the periphery
- Ray flower color
- yellow
- Tuft or plume on fruit
- at least a part of the plume is made up of fine bristles
- Spines on plant
- the plant has no spines
- Leaf blade length
- 40–400 mm
- Disk flower number
-
- 11-20
- 21-50
- 6-10
-
Flowers
- Bases of bract appendages
- NA
- Bract color
- the bracts are not colored or tinged with pink, red or purple
- Bract cycle number
- there are three or more cycles of bracts
- Bract inner side hairs
- the bracts are not hairy on their inner surfaces
- Bract keels
- the bracts do not have keels
- Bract margins
- there are fine hairs along the bract margins
- Bract outer side hair type
- the bracts are not hairy on their outer surface
- Bract outer side hairs
- the bracts are not hairy on their outer surfaces
- Bract separation
- the bracts appear completely unconnected to one another on all flower heads
- Bract shape
- the main bracts are lanceolate (widest above the base, then taper narrowly towards the tip)
- Bract spines
- the bracts have no spines
- Bract tip extension appearance
- NA
- Bract tip extension edge
- there are no projections from the bract tips
- Bract tip orientation
- the bracts are pressed against the plant, or spreading out at the tips
- Bract tip shape
-
- the tips of the bracts acute (have a sharp point)
- the tips of the bracts are acuminate (tapered to a narrow point)
- Bracts
- there are at least two distinct forms of bracts in different cycles
- Disk flower color
- yellow
- Disk flower lobe number
- 5
- Disk flower number
-
- 11-20
- 21-50
- 6-10
- Disk flower reproductive parts
- the disk flower has both pollen- and seed-producing parts
- Disk flower shape
- the disk flower is abruptly widened at some point below the lobes
- Flower head number
- each flowering stem has four or more flower heads on it
- Flower head outer flowers
- at the outer edge of the flower head, each flower has a single enlarged lobe or strap
- Flower head platform
- the base has no bristles or papery scales
- Flower head platform surface
- NA
- Flower head position
- each of the flower heads is separate on its own peduncle (stalk), not clustered in groups
- Flower head profile
- the disk is rounded across the top
- Flower head shape
- the sides of the flower head are roughly parallel, like a cylinder
- Flower type in flower heads
- the flower head has tubular disk flowers in the center and ray flowers, these often strap-shaped, around the periphery
- Height of flower head base
- 3–7 mm
- Inflorescence branching (Solidago)
- the flower heads tend to be all on one side of the stem; the tips of the flowering stems are arched or curved downwards
- Inflorescence shape
- the inflorescence is not flat-topped but appears rounded, with some flower heads distinctly higher than others
- Inflorescence stem
- the stem of the inflorescence is not hairy
- Number of bracts at flower head base
- 18–22
- Ovary attachment
- the ovary is attached at or near the base
- Ovary beak
- there is no beak on the ovary
- Ovary hairs
- the ovary has hairs on it
- Ovary lines or ribs
-
- there are seven to nine ribs visible on the ovary
- there are ten or more ribs visible on the ovary
- Ovary profile
-
- in profile, the ovary is lance-shaped, but widest above the middle
- in profile, the ovary is roughly elliptical (widest in the middle, tapering to both ends)
- Ovary surface
- the ovary surface has no points, bumps or wrinkles, though it may have lines, ribs or wings
- Ovary wing number
-
- 0
- NA
- Peduncle hairs
-
- the peduncles are hairy
- the peduncles have no hairs
- Peduncle length
- 2–3 mm
- Peduncle orientation
- the flower heads are held upright, or slightly angled outwards
- Ray flower color
- yellow
- Ray flower reproductive parts
- the ray flowers have carpels or stamens, but not both
- Ray flowers
-
- 11-15
- 16-25
- 6-10
- Ray length
- 5–6.2 mm
- Reproductive system
- some of the flowers on the plant have only carpels or stamens, while others have both carpels and stamens
- Scale tip
- NA
- Smaller bracts at base of bracts
- there is no smaller, outer cycle of bracts
- Style branch number
- the style has two branches
- Style branches
- the style branch is narrow at the tip, or the style branches are narrow at the tips
- Swelling at base of flower head
- the peduncles are not swollen, or only slightly
-
Fruits or seeds
- Dispersal unit
- the seeds fall off or are dispersed separately from one another
- Number of pappus parts
- 11 or more
- Ovary beak length
- 0 mm
- Ovary length in developed fruit
- 1.1–1.5 mm
- Seed hair tuft bases
- the pappus hairs are not attached to one another near the base
- Seed hair tuft color
- the pappus hairs are white or off-white
- Seed hair tuft details
- the pappus hairs are hooked or barbed
- Seed hair tuft length
- 3.8–4 mm
- Seed hair tuft tips
- at least some of the pappus hairs are broader at their tips than their bases
- Seed hairs uniform
- all the pappus hairs are approximately the same length
- Seed tuft scale number
- 0
- Seed tuft type
- the pappus is made of very fine hairs or bristles
- Top of disk flower ovary
- NA
- Tuft or plume on fruit
- at least a part of the plume is made up of fine bristles
-
Glands or sap
- Bract resin
- the bracts have no resin or resin glands
- Leaf blade glands
- the leaf blades have no glandular (translucent) dots or scales
- Sap
- the sap is clear and watery
-
Growth form
- Growth form
- the plant has one or more free-standing stems
- Plant lifespan
- the plant is perennial, it shows evidence of previous year's leaves, stems or stem bases
- Spines on plant
- the plant has no spines
- Underground organs
-
- the plant has a caudex (the root mass is firm and hardened at the top)
- the plant has a rhizome (a horizontal underground stem with roots growing from it)
-
Leaves
- Final leaf segment length (compound lvs only)
- 0 mm
- Final leaf segment width (compound lvs only)
- 0 mm
- Hairs on underside of leaf blade
- the underside of the leaf is not hairy, or has very few hairs
- Hairs on upper side of leaf blade
- the upper side of the leaf is not hairy, or has very few hairs
- Leaf arrangement
- alternate: there is one leaf per node along the stem
- Leaf blade base
-
- the leaf has a distinct petiole
- the leaf has no petiole
- the leaf has no petiole and at the base it clasps the stem, or goes all the way around the stem so the stem appears to pierce the leaf
- Leaf blade bloom
- the underside of the leaf has no noticeable bloom
- Leaf blade edges
- the edge of the leaf blade has no teeth or lobes
- Leaf blade flatness
- the leaf is flat (planar) at the edges
- Leaf blade hairs
- NA
- Leaf blade length
- 40–400 mm
- Leaf blade shape
-
- the leaf blade is elliptic (widest near the middle and tapering at both ends)
- the leaf blade is lanceolate (lance-shaped; widest below the middle and tapering at both ends)
- the leaf blade is linear (very narrow with more or less parallel sides)
- the leaf blade is oblanceolate (lance-shaped, but with the widest point above the middle of the leaf blade)
- the leaf blade is oblong (rectangular but with rounded ends)
- the leaf blade is ovate (widest below the middle and broadly tapering at both ends)
- Leaf blade surface colors
- there is no noticeable color variation on the upper surface of the leaf
- Leaf blade tip
-
- the tip of the leaf blade is acuminate (tapers to a long, thin point)
- the tip of the leaf blade is acute (sharply pointed)
- Leaf blade veins
- the leaf blade has one main vein running from the base towards the tip
- Leaf blade width
- 10–60 mm
- Leaf disposition
- the lower leaves are larger, toothier, and/or on longer stalks than the upper leaves
- Leaf spines
- there are no spines on the leaf edges
- Leaf stalk
-
- the leaves have leaf stalks
- the leaves have no leaf stalks, but attach directly to the stem
- Leaf stalk length
- At least 0 mm
- Leaf tip extension
- NA
- Leaf type
- leaves are simple (i.e., lobed or unlobed but not separated into leaflets)
- Leaflet number
- 0
- Specific leaf type
- the leaves are simple (i.e., lobed or unlobed but not separated into leaflets
- Teeth per side of leaf blade
- 0
-
Place
- Habitat
- wetlands
- New England state
-
- Connecticut
- Maine
- Massachusetts
- New Hampshire
- Rhode Island
- Specific habitat
-
- dunes
- marshes
- sea beaches
-
Scent
- Plant odor
- the plant does not have much of an odor
-
Stem, shoot, branch
- Flowering stem cross-section
- the flowering stem is circular, or with lots of small angles
- Leaves on stem
- there is at least one full leaf above the base of the flowering stem
- Stem bloom
- there is no powdery or waxy film on the stem
- Stem internode hair direction
- NA
- Stem internode hair length
- 0 mm
- Stem internode hair type
- the stem has no hairs between the nodes
- Stem internode hairs
- the stem has no hairs between the nodes
- Stem wings
- the stem does not have wings on it
Wetland status
Usually occurs in wetlands, but occasionally in non-wetlands. (Wetland indicator code: FACW)
In New England
Distribution
- Connecticut
- present
- Maine
- present
- Massachusetts
- present
- New Hampshire
- present
- Rhode Island
- present
- Vermont
- absent
Conservation status
Exact status definitions can vary from state to state. For details, please check with your state.
- Maine
- unranked (S-rank: SNR)
var. mexicana
- Massachusetts
- historical (S-rank: SH), H (code: H)
var. sempervirens
- Massachusetts
- widespread (S-rank: S5)
Subspecies and varieties
Solidago sempervirens L. var. sempervirens is known from CT, MA, ME, RI, NH. S. sempervirens var. mexicana (L.) Fern. is known from CT, MA, RI.
From Flora Novae Angliae dichotomous key
20. Solidago sempervirens L. n
seaside goldenrod. 20a. Solidago mexicana L. • CT, MA, ME, NH, RI. Coastal marshes, beaches, and dunes, rarely inland along heavily salted roads and salt storage areas. This species is native to coastal areas, but has been collected from some interior counties (e.g., Berkshire and Worcester County, MA), where it should be considered non-native.
1a. Involucres 3–4 mm tall; capitula with 7–11 ray flowers and 10–16 disk flowers; lower leaf blades linear to oblong-lanceolate, 10–30 mm wide … 20a. S. sempervirens var. mexicana (L.) Fern.
1b. Involucres 4–7 mm tall; capitula with 12–17 ray flowers and 17–22 disk flowers; lower leaf blades oblanceolate to narrow-ovate, 12–50 (–60) mm wide … 20b. S. sempervirens var. sempervirens
Variety sempervirens is known from CT, MA, ME, nh, RI. It is a relatively more northern race. Variety mexicana is known from CT, MA, RI. It is relatively more southern and reaches its northern limit in southern New England. Involucre measurements need to be made on mature capitula with open flowers (or later stages of development).
19×20. Solidago rugosa × Solidago sempervirens → Solidago ×asperula Desf. is a rare goldenrod hybrid known from CT, MA, ME, NH. It is known from coastal states where S. sempervirens comes into contact with S. rugosa at the upper limit of coastal marshes and beaches. It can be separated from the former by pubescent stems (at least on the upper portion) and from the latter by leaf blades with shorter teeth and less rugose veins. It can resemble S. latissimifolia, but the hybrid shows more hairs on the stems and ± sheathing petiole bases on lower leaves.