- You are here:
- Dichotomous Key
- Asteraceae
- Asteraceae Group 4
- Boltonia
- Boltonia asteroides
Boltonia asteroides — white doll's-daisy
Copyright: various copyright holders. To reuse an image, please click it to see who you will need to contact.
Facts
Two varieties of white doll's-daisy occur in New England, distinguished by the width of both the involucral bracts and the leaves near the base of the capitulescence. The genus Boltonia is named after the English naturalist and illustrator James Bolton (1735–1799), who wrote and illustrated the first english-language work on fungi, "An History of Fungusses growing about Halifax."
Habitat
Anthropogenic (man-made or disturbed habitats)
New England distribution
Adapted from BONAP data
Native: indigenous.
Non-native: introduced (intentionally or unintentionally); has become naturalized.
County documented: documented to exist in the county by evidence (herbarium specimen, photograph). Also covers those considered historical (not seen in 20 years).
State documented: documented to exist in the state, but not documented to a county within the state. Also covers those considered historical (not seen in 20 years).
Note: when native and non-native populations both exist in a county, only native status is shown on the map.
Found this plant? Take a photo and post a sighting.
Characteristics
- Habitat
- terrestrial
- New England state
-
- Connecticut
- Maine
- Massachusetts
- Rhode Island
- Vermont
- Leaf type
- leaves are simple (i.e., lobed or unlobed but not separated into leaflets)
- Leaf arrangement
-
- alternate: there is one leaf per node along the stem
- basal: the leaves are growing only at the base of the plant
- Leaf blade edges
- the edge of the leaf blade has no teeth or lobes
- Flower type in flower heads
- the flower head has tubular disk flowers in the center and ray flowers, these often strap-shaped, around the periphery
- Ray flower color
-
- blue to purple
- white
- Tuft or plume on fruit
- there is no plume, or the plume is made up of scales, awns, a crown, or a rim
- Spines on plant
- the plant has no spines
- Leaf blade length
- 20–220 mm
- Flower head width
- 22–38 mm
- Disk flower number
- more than 50
-
Flowers
- Bract cycle number
- there are three or more cycles of bracts
- Bract inner side hairs
- the bracts are not hairy on their inner surfaces
- Bract outer side hair type
- the bracts are not hairy on their outer surface
- Bract outer side hairs
- the bracts are not hairy on their outer surfaces
- Bract shape
-
- the main bracts are linear (long and very narrow)
- the main bracts are oblanceolate (widest near the tip, but otherwise narrow and tapering)
- the main bracts are oblong (roughly rectangular but rounded at the ends)
- the main bracts are of a different shape than the given options
- Bract spines
- the bracts have no spines
- Bract texture
-
- the bracts appear thin, flexible and nearly translucent
- the bracts have a similar texture to a leaf
- Bract tip color
- the tips are a different color from the center of the bract
- Bract tip orientation
-
- the bracts are pressed against the plant, or spreading out at the tips
- the tips of the bracts curve outwards and downwards from the plant
- Bract tip shape
-
- the tips of the bracts acute (have a sharp point)
- the tips of the bracts are obtuse (have a blunt point)
- the tips of the bracts are rounded
- Bract width
- 0.5–2
- Bracts
- the bracts in separate cycles are similar or gradually changing from the outer to inner cycles
- Disk flower color
- yellow
- Disk flower lobe number
- 5
- Disk flower number
- more than 50
- Disk flower reproductive parts
- the disk flower has both pollen- and seed-producing parts
- Disk flower shape
- the disk flower is tube-shaped (cylindrical), or gradually widening like a funnel
- Disk width
- 6–10 mm
- Flower head number
- each flowering stem has four or more flower heads on it
- Flower head outer flowers
- at the outer edge of the flower head, each flower has a single enlarged lobe or strap
- Flower head platform
- the base has no bristles or papery scales
- Flower head platform surface
- NA
- Flower head profile
-
- the disk is conical across the top
- the disk is flat or nearly flat across the top
- Flower head shape
- the flower head is hemispherical (like the bottom half of a sphere)
- Flower head width
- 22–38 mm
- Flower type in flower heads
- the flower head has tubular disk flowers in the center and ray flowers, these often strap-shaped, around the periphery
- Height of flower head base
- 3–5 mm
- Inflorescence branching (Solidago)
- NA
- Inflorescence shape
-
- the inflorescence is flat-topped in profile
- the inflorescence is not flat-topped but appears rounded, with some flower heads distinctly higher than others
- Inflorescence stem
- the stem of the inflorescence is not hairy
- Number of bracts at flower head base
- 30–55
- Ovary cross-section
-
- the ovary has five or more corners in cross-section
- the ovary is compressed (flattened)
- Ovary hair type
- the ovary has hairs on it, but the hairs have no glands
- Ovary hairs
- the ovary has hairs on it
- Ovary lines or ribs
- there are two lines or ribs visible on the ovary
- Ovary profile
-
- in profile, the ovary is another shape
- in profile, the ovary is roughly egg-shaped, but widest above the middle
- Peduncle length
- 5–220 mm
- Ray flower color
-
- blue to purple
- white
- Ray flower reproductive parts
- there are neither carpels nor stamens in the ray flowers
- Ray flowers
-
- 16-25
- 26-50
- more than 50
- Ray length
- 5–13 mm
- Reproductive system
- some of the flowers on the plant have only carpels or stamens, while others have both carpels and stamens
- Scale tip
- NA
- Smaller bracts at base of bracts
- there is no smaller, outer cycle of bracts
- Style branch number
- the style has two branches
- Style branches
- the style branch is narrow at the tip, or the style branches are narrow at the tips
- Width of flower head base
- 6–14 mm
-
Fruits or seeds
- Number of pappus parts
-
- 10
- 11 or more
- 9
- Ovary length in developed fruit
- 1–3 mm
- Ovary width in developed fruit
- 0.8–2 mm
- Seed hair tuft length
- 0.6–2 mm
- Seed hairs uniform
- there are two distinct lengths of pappus hairs
- Seed tuft scale number
- 0
- Seed tuft type
-
- the pappus is made of stiff, tapering bristles
- the pappus is made of very fine hairs or bristles
- Top of disk flower ovary
- NA
- Tuft or plume on fruit
- there is no plume, or the plume is made up of scales, awns, a crown, or a rim
-
Glands or sap
- Bract resin
- the bracts have resin or resin glands
- Ovary glands
- there are glands on the ovary surface
- Sap
- the sap is clear and watery
-
Growth form
- Growth form
- the plant has one or more free-standing stems
- Horizontal rooting stem
- there are stolons on some plants
- Plant lifespan
- the plant is perennial, it shows evidence of previous year's leaves, stems or stem bases
- Spines on plant
- the plant has no spines
- Underground organs
- the plant has a rhizome (a horizontal underground stem with roots growing from it)
-
Leaves
- Final leaf segment length (compound lvs only)
- 0 mm
- Final leaf segment width (compound lvs only)
- 0 mm
- Hairs on underside of leaf blade
- the underside of the leaf is not hairy, or has very few hairs
- Hairs on upper side of leaf blade
- the upper side of the leaf is not hairy, or has very few hairs
- Leaf arrangement
-
- alternate: there is one leaf per node along the stem
- basal: the leaves are growing only at the base of the plant
- Leaf blade base
- the leaf has no petiole
- Leaf blade base shape
- the base of the leaf blade is cuneate (wedge-shaped, tapers to the base with relatively straight, converging edges), or narrow
- Leaf blade edges
- the edge of the leaf blade has no teeth or lobes
- Leaf blade hairs
- NA
- Leaf blade length
- 20–220 mm
- Leaf blade shape
-
- the leaf blade is lanceolate (lance-shaped; widest below the middle and tapering at both ends)
- the leaf blade is linear (very narrow with more or less parallel sides)
- the leaf blade is oblanceolate (lance-shaped, but with the widest point above the middle of the leaf blade)
- Leaf blade tip
-
- the tip of the leaf blade is acuminate (tapers to a long, thin point)
- the tip of the leaf blade is acute (sharply pointed)
- Leaf blade width
- 2–30 mm
- Leaf disposition
- the leaves are nearly similar in size, prominence of teeth, and length of stalks throughout the stem
- Leaf spines
- there are no spines on the leaf edges
- Leaf stalk
- the leaves have no leaf stalks, but attach directly to the stem
- Leaf stalk length
- 0 mm
- Leaf tip extension
- NA
- Leaf type
- leaves are simple (i.e., lobed or unlobed but not separated into leaflets)
- Specific leaf type
- the leaves are simple (i.e., lobed or unlobed but not separated into leaflets
-
Place
- Habitat
- terrestrial
- New England state
-
- Connecticut
- Maine
- Massachusetts
- Rhode Island
- Vermont
- Specific habitat
- man-made or disturbed habitats
-
Stem, shoot, branch
- Leaves on stem
- there is at least one full leaf above the base of the flowering stem
- Stem internode hair direction
- NA
- Stem internode hair length
- 0 mm
- Stem internode hair type
- the stem has no hairs between the nodes
- Stem internode hairs
- the stem has no hairs between the nodes
Wetland status
Usually occurs in wetlands, but occasionally in non-wetlands. (Wetland indicator code: FACW)
In New England
Distribution
- Connecticut
- present
- Maine
- present
- Massachusetts
- present
- New Hampshire
- absent
- Rhode Island
- present
- Vermont
- present
Conservation status
Exact status definitions can vary from state to state. For details, please check with your state.
var. latisquama
- Massachusetts
- not applicable (S-rank: SNA)
var. recognita
- Massachusetts
- not applicable (S-rank: SNA)
Subspecies and varieties
Variety latisquama is known from CT, MA, ME, RI, VT. Variety recognita is known from CT, MA, ME, RI.
From Flora Novae Angliae dichotomous key
1. Boltonia asteroides (L. ) Ľ Hér. E
white doll’s-daisy. 1a. Boltonia latisquama Gray; 1b. Boltonia latisquama Gray var. microcephala Fern. & Grisc.; B. latisquama Gray var. occidentalis Gray; B. latisquama Gray var. recognita Fern. & Grisc.; B. recognita (Fern. & Grisc.) G.N. Jones • CT, MA, ME, RI, VT. Roadsides, fields, waste areas.
1a. Outer and middle involucral bracts oblanceolate to rhombic or spatulate, obtuse to rounded at the apex, 1–2 mm wide; leaf blades near base of capitulescence mostly 1–2 mm wide … 1a. B. asteroides var. latisquama (Gray) Cronq.
1b. Involucral bracts linear to narrow-oblong, acute at the apex, 0.5–1.3 mm wide; leaf blades near base of capitulescence mostly wider than 4 mm … 1b. B. asteroides var. recognita (Fern. & Grisc.) Cronq.
Variety latisquama is known from CT, MA, ME, RI, VT. Variety recognita is known from CT, MA, ME, RI.