- You are here:
- Simple Key
- Grass-like plants
- True grasses
- Ammophila breviligulata
Ammophila breviligulata — American beach grass
Copyright: various copyright holders. To reuse an image, please click it to see who you will need to contact.
Facts
American beach grass is a dominant species of sandy ocean and lake beaches and coastal dunes. There are two subspecies in our region, one of which (Ammophila breviligulata ssp. champlainensis) is found only on Lake Champlain, Vermont and is rare. The other is native to coastal dunes and beaches, but has sometimes been planted as a sand stabilizer in inland locations. For instance, in the early 1800's, residents of Truro, MA were required to plant it on their property to bind the sand.
Habitat
Coastal beaches (sea beaches), dunes, shores of rivers or lakes
New England distribution
Adapted from BONAP data
Native: indigenous.
Non-native: introduced (intentionally or unintentionally); has become naturalized.
County documented: documented to exist in the county by evidence (herbarium specimen, photograph). Also covers those considered historical (not seen in 20 years).
State documented: documented to exist in the state, but not documented to a county within the state. Also covers those considered historical (not seen in 20 years).
Note: when native and non-native populations both exist in a county, only native status is shown on the map.
Found this plant? Take a photo and post a sighting.
Characteristics
- Habitat
-
- terrestrial
- wetlands
- New England state
-
- Connecticut
- Maine
- Massachusetts
- New Hampshire
- Rhode Island
- Vermont
- Leaf blade width
- 0.5–8 mm
- Inflorescence branches
-
- the flowers are attached to branches rather than to the main axis of the inflorescence
- there are no branch points between the base of the inflorescence axis and the flowers, or they are not obvious
- Spikelet length
- 10–15 mm
- Glume relative length
- one or both glumes are as long or longer than all of the florets
- Awn on glume
- the glume has no awn
- One or more florets
- there is one floret per spikelet
- Lemma awn length
- 0 mm
- Leaf sheath hair type
- there are no hairs on the surface of the leaf sheath
- Leaf ligule length
- 1–4.6 mm
- Anther length
- 3–7 mm
-
Flowers
- Anther length
- 3–7 mm
- Anther number
- 3
- Awn on glume
- the glume has no awn
- Bristles below spikelets
- no
- Floret lower bract texture
- the lemma is thin and flexible
- Floret number
- 1
- Floret types within spikelet
- all the florets within a spikelet are similar
- Glume awn length
- 0 mm
- Glume keel
- the glume keels are rough or hairy
- Glume relative length
- one or both glumes are as long or longer than all of the florets
- Glume shape
- the glume is V-shaped in cross-section
- Glume veins
-
- 1
- 3
- Glumes per spikelet
- 2
- Inflorescence arrangement
- the spikelets are uniform
- Inflorescence axis orientation
- the inflorescence axis is straight
- Inflorescence branch roughness
- the inflorescence branches are smooth or only slightly rough
- Inflorescence branches
-
- the flowers are attached to branches rather than to the main axis of the inflorescence
- there are no branch points between the base of the inflorescence axis and the flowers, or they are not obvious
- Inflorescence crowding
- the panicle is somewhat to very congested (crowded), and the branches may not be clearly seen without close inspection
- Inflorescence length
- 10–400 mm
- Inflorescence length to width ratio
- 9–16
- Inflorescence type (general)
-
- the inflorescence is a spike, or is spike-like, lacking obvious branches
- the spikelets are borne on stalks or on branches
- Inflorescence type (specific)
- the inflorescence is branched, and the branches do NOT both grow from the same side of the plant AND look like spikes
- Inflorescence width
- 10–25 mm
- Inforescence position
- the spikelets are mainly carried at the end of the stem
- Lemma awn base
- NA
- Lemma awn coiled
- NA
- Lemma awn length
- 0 mm
- Lemma awn number
- the lemma has no awn
- Lemma awn orientation
- NA
- Lemma base hair length
- 1–3 mm
- Lemma base hairs
- the lemma has hairs at the base
- Lemma cross-section
- the lemma is V-shaped if you cut across the midpoint
- Lemma surface
- the surface of the lemma is relatively smooth (not counting any longitudinal veins or hairs)
- Lemma tip
- the lemma tip is a simple point, with or without an awn (long narrow extension ending in a point)
- Lemma tip shape
- the lemma tip tapers to a narrow point (it may or may not also have an awn or teeth at the tip)
- Lemma vein number
-
- 3
- 5
- Lower glume length
- 7–13 mm
- Lower glume relative length
- the lower glume is nearly as long, or as long as, the upper glume
- One or more florets
- there is one floret per spikelet
- Palea length
- 8–14 mm
- Palea relative length
- palea is one half to fully as long as lemma
- Reproductive system
- all the flowers on the plant have both carpels and stamens (synoecious)
- Spikelet axis length
- 0 mm
- Spikelet axis tip
- there is an extension of the spikelet axis beyond the tip of the spikelet
- Spikelet disintegration
- the spikelet breaks off above the glumes, so that after the florets fall off, the glumes remain
- Spikelet length
- 10–15 mm
- Spikelet number per node
- 0
- Spikelet pedicel
- the spikelets have pedicels
- Spikelet pedicel length
- 0.5–3 mm
- Spikelets spiny
- the spikelets do not appear spiny
- Tip of glume
- the tip of the glume is not divided (though it may have an awn on it)
- Upper glume length
- 8–15 mm
- Upper glume relative length
- the upper glume is more than one half as long as the lowest lemma
- Upper glume shape
- the upper glume is widest at or below the middle
-
Fruits or seeds
- Groove on seed
- the caryopsis has a groove running most of its length
- Seed length
- 3–3.6 mm
-
Growth form
- Horizontal rooting stem
- no
- Lifespan
- the plant lives more than two years
- Rhizomes
- yes
- Roots
- the plant has rhizomes (horizontal underground stem with roots growing from it)
-
Leaves
- Basal leaves
- the plant has large or prominent tufts of leaves at the base of the flowering stem
- Leaf auricles
- the leaves have auricles
- Leaf basal lobe hairy
- the lobes at the base of the leaf blades are hairless
- Leaf blade cross-section
- the leaf blade is clearly folded or rolled inwards
- Leaf blade hairs
- the leaf blade is hairless, but it may have tiny prickles that give it a sand-papery feel
- Leaf blade length
- 15–80 cm
- Leaf blade texture
- the leaf blade is rough and sandpapery
- Leaf blade width
- 0.5–8 mm
- Leaf ligule length
- 1–4.6 mm
- Leaf ligule type
- the leaf ligule is in the form of a membrane with fine hairs
- Leaf margin glands
- there are no glands along the edges of the leaf blade
- Leaf sheath closed around stem
- the margins of the leaf sheath are overlapping and not fused together except in the basal half (or less)
- Leaf sheath hair type
- there are no hairs on the surface of the leaf sheath
- Leaf sheath hairs
- there are no hairs on the surface of the leaf sheath
-
Place
- Habitat
-
- terrestrial
- wetlands
- New England state
-
- Connecticut
- Maine
- Massachusetts
- New Hampshire
- Rhode Island
- Vermont
- Specific habitat
-
- dunes
- sea beaches
- shores of rivers or lakes
-
Stem, shoot, branch
- Hairs at nodes
- the stem nodes are hairless or they have very sparse hairs
- Plant height
- 50–130 cm
- Stem hairs
- the stem is nearly to completely hairless
- Stem orientation
- the stems are upright
- Stem spacing
- the stems grow singly or a few together (they may form diffuse colonies)
Wetland status
Occurs only in non-wetlands. (Wetland indicator code: UPL)
In New England
Distribution
- Connecticut
- present
- Maine
- present
- Massachusetts
- present
- New Hampshire
- present
- Rhode Island
- present
- Vermont
- present
Conservation status
Exact status definitions can vary from state to state. For details, please check with your state.
- Maine
- SNR (code: SNR)
- New Hampshire
- uncommon (S-rank: S3), W (code: W)
ssp. breviligulata
- Massachusetts
- fairly widespread (S-rank: S4)
- Vermont
- not applicable (S-rank: SNA)
ssp. champlainensis
- Vermont
- extremely rare (S-rank: S1), endangered (code: E)
Subspecies and varieties
Ammophila breviligulata Fern. ssp. breviligulata is knownfrom CT, MA, ME, NH, RI, VT. A. breviligulata ssp. champlainensis (Seymour) P.J. Walker, C.A. Paris, & Barrington ex Barkworth is known from VT and is of regional conservation concern.
From Flora Novae Angliae dichotomous key
1. Ammophila breviligulata Fern. N│EC
American beach grass. 1a. Ammophila champlainensis Seymour • CT, MA, ME, NH, RI, VT. Coastal dunes and beaches, sandy lake beaches. Ammophila champlainensis has been treated by many past authors as an endemic of Lake Champlain. However, there has been tremendous disagreement over how to treat inland vs. coastal populations of Ammophila breviligulata, because inland populations resembling A. champlainensis also occur around the Great Lakes, in the Saint Lawrence River Valley, and at Lac Saint-Jean. A recent study by Delisle-Oldham et al. (2008) looked at the A. breviligulata complex throughout eastern North America and recommended treating it as one polymorphic species (noting that Lake Champlain populations were the most distinctive group). Their study relied on seven important morphological characters, but phenology and DNA sequence data were not analyzed (note that both of these latter data sets show inland populations of A. champlainensis are distinct from A. breviligulata of the Atlantic coast). Despite the fact that their study shows overlap in all morphological characteristics when populations are examined range-wide, the taxa found in New England are known to be genetically different and flower at different times (as further evidenced by common garden experiments). Therefore, A. champlainensis is recognized here, albeit at a lower rank.
1a. Plants flowering in June through mid-July, restricted to beaches of Lake Champlain, VT; inflorescence (10–) 12–17.3 (–22) cm tall; glumes acute to short-acuminate at apex, the lower one (7–) 9–10.5 (–12) mm long … 1a. A. breviligulata ssp. champlainensis (Seymour) P.J. Walker, C.A. Paris, & Barrington ex Barkworth
1b. Plants flowering in late July through September, restricted to Atlantic coast beaches and dunes (except where introduced); inflorescence (14.3–) 21–36.5 cm tall; glumes acuminate at apex, the lower one (7.5–) 11–13 mm long … 1b. A. breviligulata ssp. breviligulata
Subspecies champlainensis is known from VT and is of regional conservation concern. It occurs on sand beaches of lower (i.e., northern) Lake Champlain. Subspecies breviligulata is known from CT, MA, ME, NH, RI, VT. It is native to coastal dunes and beaches but has been introduced as a sand stabilizer to some inland locations (e.g., VT).
Native to North America?
Yes and no (some introduced)
Sometimes confused with
- Leymus mollis:
- inflorescence a spike and spikelets with 3-6 florets, and lemmas pubescent over the abaxial surface (vs. A. breviligulata, with the inflorescence a highly congested panicle, spikelets with only 1 floret, and lemmas not pubescent over the abaxial surface).