- You are here:
- Simple Key
- Grass-like plants
- True grasses
- Agrostis scabra
Agrostis scabra — rough bentgrass
Copyright: various copyright holders. To reuse an image, please click it to see who you will need to contact.
Facts
Rough bentgrass grows in a variety of habitats across much of North America and takes different foms depending on the location. It is one of the most effective native grasses used in revegetation. It responds to burning with increased growth and spread.
Habitat
Anthropogenic (man-made or disturbed habitats), cliffs, balds, or ledges, forest edges, forests, meadows and fields, shores of rivers or lakes
New England distribution
Adapted from BONAP data
Native: indigenous.
Non-native: introduced (intentionally or unintentionally); has become naturalized.
County documented: documented to exist in the county by evidence (herbarium specimen, photograph). Also covers those considered historical (not seen in 20 years).
State documented: documented to exist in the state, but not documented to a county within the state. Also covers those considered historical (not seen in 20 years).
Note: when native and non-native populations both exist in a county, only native status is shown on the map.
Found this plant? Take a photo and post a sighting.
Characteristics
- Habitat
-
- terrestrial
- wetlands
- New England state
-
- Connecticut
- Maine
- Massachusetts
- New Hampshire
- Rhode Island
- Vermont
- Leaf blade width
- 0.2–2 mm
- Inflorescence branches
- the flowers are attached to branches rather than to the main axis of the inflorescence
- Spikelet length
- 1.8–3.4 mm
- Glume relative length
- one or both glumes are as long or longer than all of the florets
- Awn on glume
-
- the glume has an awn
- the glume has no awn
- One or more florets
- there is one floret per spikelet
- Lemma awn length
- 0–3 mm
- Leaf sheath hair type
- there are no hairs on the surface of the leaf sheath
- Leaf ligule length
- 0.7–5 mm
- Anther length
- 0.4–0.7 mm
-
Flowers
- Anther length
- 0.4–0.7 mm
- Anther number
- 3
- Awn on glume
-
- the glume has an awn
- the glume has no awn
- Bristles below spikelets
- no
- Floret lower bract texture
- the lemma is thin and flexible
- Floret number
- 1
- Floret types within spikelet
- all the florets within a spikelet are similar
- Glume keel
- the glume keels are rough or hairy
- Glume relative length
- one or both glumes are as long or longer than all of the florets
- Glume shape
- the glume is V-shaped in cross-section
- Glume veins
- 1
- Glumes per spikelet
- 2
- Inflorescence arrangement
- the spikelets are uniform
- Inflorescence axis hairs
-
- the inflorescence axis is rough and feels like sand-paper
- the inflorescence axis is smooth and has no hairs
- Inflorescence axis orientation
- the inflorescence axis is straight
- Inflorescence branch length
- 4–12 cm
- Inflorescence branch roughness
- the inflorescence branches are somewhat to very rough
- Inflorescence branches
- the flowers are attached to branches rather than to the main axis of the inflorescence
- Inflorescence branches coming off the lowest stem node
- 1–12
- Inflorescence crowding
- the panicle is somewhat to very spread out, with clearly-evident branches
- Inflorescence length
- 40–500 mm
- Inflorescence length to width ratio
- 2.5–8
- Inflorescence type (general)
- the spikelets are borne on stalks or on branches
- Inflorescence type (specific)
- the inflorescence is branched, and the branches do NOT both grow from the same side of the plant AND look like spikes
- Inflorescence width
- 5–200 mm
- Inforescence position
- the spikelets are mainly carried at the end of the stem
- Lemma awn base
- the awn is attached at the lower half of the lemma (it emerges from near the base of the lemma)
- Lemma awn coiled
- the lemma awn is straight or twisted, but not coiled one half turn
- Lemma awn length
- 0–3 mm
- Lemma awn number
-
- the lemma has no awn
- the lemma has one awn on it
- Lemma awn orientation
-
- the awn of the lemma is straight
- the awn of the lemma on dried or older plants is curved or bent outwards
- Lemma base hair length
- Up to 0.2 mm
- Lemma base hairs
- the lemma has hairs at the base
- Lemma cross-section
- the lemma is flat or rounded if you cut across the midpoint
- Lemma hairs
- the lemma is hairless between the veins
- Lemma keel hairs
- the keel of the lemma is rough, or has fine hairs
- Lemma marginal vein hairs
- the marginal vein of the lemma is hairless
- Lemma surface
- the surface of the lemma is relatively smooth (not counting any longitudinal veins or hairs)
- Lemma tip
-
- the lemma tip is a simple point, with or without an awn (long narrow extension ending in a point)
- the lemma tip is split into two or more points
- Lemma tip shape
-
- the lemma tip tapers to a broad point (it may or may not also have an awn or teeth at the tip)
- the lemma tip tapers to a narrow point (it may or may not also have an awn or teeth at the tip)
- Lemma vein number
- 5
- Lemma vein orientation
- the veins on the lemma stay roughly parallel throughout
- Lower glume length
- 1.8–3.4 mm
- Lower glume relative length
- the lower glume is nearly as long, or as long as, the upper glume
- One or more florets
- there is one floret per spikelet
- Palea length
- 0–0.2 mm
- Palea relative length
- palea is less than one half as long as lemma or absent
- Reproductive system
- all the flowers on the plant have both carpels and stamens (synoecious)
- Spikelet axis length
- 0 mm
- Spikelet axis tip
- there is no extension of the spikelet axis beyond the tip of the spikelet
- Spikelet disintegration
- the spikelet breaks off above the glumes, so that after the florets fall off, the glumes remain
- Spikelet length
- 1.8–3.4 mm
- Spikelet number per node
- 0
- Spikelet pedicel
- the spikelets have pedicels
- Spikelet pedicel length
- 0.5–5 mm
- Spikelet position
- the spikelets emerge mainly from the upper halves of the inflorescence branches
- Spikelet shape
- the spikelets are lanceolate (lance-shaped, widest below the middle and tapering narrowly to the ends) in profile
- Spikelets spiny
- the spikelets do not appear spiny
- Tip of glume
- the tip of the glume is not divided (though it may have an awn on it)
- Upper glume length
- 1.8–3.4 mm
- Upper glume relative length
- the upper glume is more than one half as long as the lowest lemma
- Upper glume shape
- the upper glume is widest at or below the middle
-
Fruits or seeds
- Seed length
- 0.9–1.4 mm
-
Growth form
- Horizontal rooting stem
- no
- Lifespan
- the plant lives more than two years
- Rhizomes
- no
- Roots
- there are only slender roots on the plant
-
Leaves
- Basal leaves
- the plant has large or prominent tufts of leaves at the base of the flowering stem
- Leaf auricles
- the leaves do not have auricles
- Leaf basal lobe hairy
- NA
- Leaf blade cross-section
-
- the leaf blade is clearly folded or rolled inwards
- the leaf blade is more or less flat in cross-section, or slightly folded or rolled inwards
- Leaf blade hairs
- the leaf blade is hairless, but it may have tiny prickles that give it a sand-papery feel
- Leaf blade length
- 4–14 cm
- Leaf blade texture
- the leaf blade is rough and sandpapery
- Leaf blade width
- 0.2–2 mm
- Leaf ligule length
- 0.7–5 mm
- Leaf ligule type
- the leaf ligule is in the form of a membrane with fine hairs
- Leaf margin glands
- there are no glands along the edges of the leaf blade
- Leaf sheath closed around stem
- the margins of the leaf sheath are overlapping and not fused together except in the basal half (or less)
- Leaf sheath color and persistence
- the leaf sheathes are off-white to light-brown and mostly persist in older leaves
- Leaf sheath hair type
- there are no hairs on the surface of the leaf sheath
- Leaf sheath hairs
- there are no hairs on the surface of the leaf sheath
-
Place
- Habitat
-
- terrestrial
- wetlands
- New England state
-
- Connecticut
- Maine
- Massachusetts
- New Hampshire
- Rhode Island
- Vermont
- Specific habitat
-
- cliffs, balds, or ledges
- edges of forests
- forests
- man-made or disturbed habitats
- meadows or fields
- shores of rivers or lakes
-
Stem, shoot, branch
- Hairs at nodes
- the stem nodes are hairless or they have very sparse hairs
- Plant height
- 7.5–90 cm
- Stem hairs
- the stem is nearly to completely hairless
- Stem node number
- 1–3
- Stem orientation
- the stems are upright
- Stem spacing
- the stems grow close together in compact clusters or tufts
Wetland status
Occurs in wetlands or non-wetlands. (Wetland indicator code: FAC)
In New England
Distribution
- Connecticut
- present
- Maine
- present
- Massachusetts
- present
- New Hampshire
- present
- Rhode Island
- present
- Vermont
- present
Conservation status
Exact status definitions can vary from state to state. For details, please check with your state.
- Massachusetts
- widespread (S-rank: S5)
var. scabra
- Massachusetts
- unranked (S-rank: SNR)
From Flora Novae Angliae dichotomous key
9. Agrostis scabra Willd. N
rough bentgrass. Agrostis geminata Trin.; A. hyemalis (Walt.) B.S.P. var. scabra (Willd.) H.A. Blomquist; A. hyemalis (Walt.) B.S.P. var. tenuis (Tuckerman) Gleason; A. scabra Willd. var. geminata (Trin.) Swallen; A. scabra Willd. var. septentrionalis Fern. • CT, MA, ME, NH, RI, VT; throughout. Fields, forest clearings, open shorelines, roadsides, and open balds, tolerant of a wide range of hydrology. A form with shorter spikelets and anthers is sometimes collected from higher elevation peaks (var. tenuis). Another form (var. geminata), with shorter panicle branches and frequently with awned spikelets (the awn arising from the keel of the lemma), is also collected from ridges and summits. This latter form is sometimes confused with A. mertensii. Both are distinctive in their extremes but overlap extensively with typical A. scabra.
Native to North America?
Yes
Sometimes confused with
- Agrostis hyemalis:
- glumes 1-2 mm long and lemmas 0.8-1.2 mm long (vs. A. scabra, with glumes 1.8-3.4 mm long and lemmas 1.4-2 mm long).
Synonyms
- Agrostis geminata Trin.
- Agrostis hyemalis var. scabra (Willd.) H.A. Blomquist
- Agrostis hyemalis (Walt.) B.S.P. var. tenuis (Tuckerman) Gleason
- Agrostis scabra var. geminata (Trin.) Swallen
- Agrostis scabra var. septentrionalis Fern.